How To Repair a Flooding Toilet
Many toilets in commercial buildings are controlled by a device known as a flushometer. While these devices usually work well, they may sometimes malfunction. This can cause toilets to engage in a never-ending flush cycle, ultimately driving up your water bill and resulting in damage from toilet overflow. If your building in Fort Collins, CO, is suffering from this issue, learn how to fix it.
Step-by-Step Toilet Repair Guide
Repairing a toilet is a relatively simple process, even if you have little plumbing experience. Follow this guide to stop a toilet flood:
Use a flat screwdriver to shut off the water. There should be a slot on either side of the flushometer, depending on which direction it's facing.
Use a wrench to loosen the flushometer's top lid. After this, you should be able to unscrew the lid using your hands.
Carefully remove the flange cover to expose the gasket. You may experience some water spray while performing this step.
Remove the gasket and clean out any built-up sediment. It's a good idea to thoroughly rinse the gasket as well. Use a small, thin object to clean out the weep hole.
Replace the gasket after you finish cleaning it and reverse steps 1 through 4 to reassemble the flushometer.
Getting Professional Assistance
If the above steps do not resolve your toilet overflow problem, you may have to replace the gasket completely. If your toilet still isn't working properly, contact professional plumbers to assist you with the issue. When your commercial bathroom suffers any type of water damage as a result of the toilet flood, you need to contact flood remediation experts to help resolve the problem.
A continuously flushing toilet can drive up your water bill, as well as annoy your employees and drive customers away. It's imperative that you resolve any toilet overflow issues as soon as possible so that you can resume business as usual.